368   Mapping of analog setpoints (SP)

Created: 24 Aug 2006

Status: In Force (green)

Part: Part 8-1 (2004)

Links:

Page: 84 and 86

Clause: 20.5 and 20.7 and 20.7.1.3

Paragraph:

Category: Issue for edition 2 of this part

Issue

The tables show mapping of 7-2 "Value" into xxx$ctlVal. It does not allow the setMag structured attribute of setpoints to be used.

Proposal

Indicate that 7-2 "Value" is mapped to the underlying CDC of the control object. For example, part of PDIS.PoRch setpoint data is mapped to PDIS.PoRch.Oper.setMag.f.
This also requires additional text (and another Table) in Annex E.4 near E.4.4 indicating values for setMag.

Discussion Created Status
13 Oct 06 In Force (green)
-Change 3 place 'Where <xxx> is the appropriate CDC (e.g. ctlVal or setMag)' to 'Where <xxx> is the appropriate CDC (e.g. ctlVal or setMag$f or setMag$i)'
-The suggestion for Table E.8 shows mxVal for CDC APC. This CDC has only setMag and not mxVal. The M/O/C entry for this line should be as 'M for APC and ASG'.
-Tables E.9 and E.10 should be modified like E.8 shown above

Replication of Bruce's comment.
12 Oct 06 Ballot Period
Agree with Bruce's second comment. 12 Oct 06 Ballot Period
29 Sep 06 Ballot Period
agreed...Proposed text changes are attached. 07 Sep 06 Discussion (red)

 

Privacy | Contact | Disclaimer

Tissue DB v. 24.4.30.1